Changing a motorbike’s spark plugs is one of the easiest jobs a home mechanic can carry out with a few basic tools. However, the intervals at which you change your bike's plugs vary from model to model. Some motorcycle manufacturers recommend replacing them every few thousand miles, while others stretch this to around 20,000 miles.
Your Haynes manual will show you your bike's spark plug, as well as specifying which plugs to fit and what the electrode gap should be, along with the spark plug torque setting.
The process of removing and replacing your bike’s spark plugs is straightforward, but there are several things to be aware of before you begin the task.
The Haynes video tutorial below shows you what's involved in the process of swapping out your bike's plugs and how and if you should check the electrode gap, depending on the plug’s make-up.
Spark plug engine health guide
A spark plug's firing end can give an indication of the general condition of the engine; the following pictures show a range of conditions.
A brown, tan or grey firing end on the spark plug
Indicates that the engine is in good condition and that the plug type is correct
Light brown ash deposits on the spark plug
Encrusted on the electrodes and insulator, these will lead to misfires and hesitation. Caused by oil in the combustion chamber or poor quality fuel
Dry, black carbon deposits on the spark plug
Lead to misfires and a weak spark. Caused by an over-rich mixture, faulty cold start system or blocked air filter
Wet, oily deposits on the spark plug
Lead to misfires and weak spark. Caused by oil leakage past piston rings or valve guides
Blistered white insulator and glazed spark plug electrodes
Caused by an ignition fault or overheated engine
